Go Home

Products Ordering Shipping Info. Contact Info Home


Wired Intercom from

Stonewood Logo Granite Logo

System Complete Intercom System

Here is a complete four station intercom system from Granite Sound (formerly known as Stonewood Audio). Consists of one CMS2 Master Station, three CBP1 single channel belt packs and four CHS1 headsets. The only thing that needs to be added are standard 3 pin XLR extention cables, whatever lengths you need to connect the individual belt packs to the master station.

 SASYS1   $1,299.95
Free shipping on any order containing this item (U.S. addresses).


Same system with dual headsets.

 SASYS2   $1,349.95
Free shipping on any order containing this item (U.S. addresses).













CMS2 Master Station Model CMS2

Considered by many to be the definitive master station, thanks to it legendary ease of use, the Stonewood Audio CMS2 Master Station can be used with up to 16 outstations, and enables 2-channel, A, B and A + B, while maintaining complete independence between the channels. Easy-to-access controls enable effortless operation. The CMS2 gives the operator control over several functions which are common to the whole system. Both power and audio are supplied via six, three pin male XLR connectors with three connectors per channel, plus, a four pin male XLR connector for headset connection, volume control, side tone adjustment and a Push to Talk (PTT) switch. There is an additional line input via a three pin female XLR on the rear panel (with screwdriver level adjustment) and a switch to route the signal to either or both channels.
Click on the photo for a closer look.
To see a rear panel view, click here.
To view or print a copy of the data sheet for this item, click here.

 SACMS2   $599.95
Free shipping on any order containing this item (U.S. addresses).

















CPS2 Dual Power Supply Model CPS2

The Stonewood Audio CPS2 dual power supply can power single or dual channel intercom systems and allow communication with either or both of the channels, permitting the use of up to 16 outstations. The CPS2 is a cost effective alternative to integrating a Master Station into a system when master control is not imperative, or it can also be installed as an additional power supply to allow for an increase of outstations into the system.
Click on the photo for a closer look.
To see a rear panel view, click here.
To view or print a copy of the data sheet for this item, click here.

 SACPS2   $219.95












CCU4 Portable Intercom Station Model CCU4

The CCU4 is an easy to set up and low cost entry level intercom system. The unit has been designed to offer many features found in Granite Sound's professional intercom system range, at the lowest price possible without unacceptable concessions. This entry level product is aimed at the first time user and those working with a tight budget where a simple, efficient and expandable portable intercom system is required. The CCU4 can operate from 120 VAC with the included power adapter or can functionally operate for days using AA batteries. This 6-way intercom system is a simple-to-set-up solution, perfect for novice users or smaller systems. Headsets are plugged directly into the unit, removing the need for complicated or confusing cabling. With the addition of a splitter box for the headsets, this unit will comfortably support 6 users.
Click on the photo for a closer look.
To see a rear panel view, click here.
To view or print a copy of the data sheet for this item, click here.

 SACCU4   $199.95

















CBP1 Single Channel Belt Pack Model CBP1

The Granite Sound CBP1 is a single channel general purpose beltpack, compatible with both Granite Sound and Stonewood Audio equipment as well as most other communication systems available on the market. The unit incorporates a three position microphone switch, a momentary action PTT (push to talk) function, a call button with flashing indicatior, headphone volume knob and variable side tone adjustment. Connection to the communication line is made by standard 3 pin XLR cables.
Click on the photo for a closer look.
To see a rear panel view, click here.
To see a bottom view, click here.
To view or print a copy of the data sheet for this item, click here.

 SACBP1   $159.95














DC2 Dual Channel Belt Pack Model DC2

Powerful and durable, the DC2 beltpack has 2 circuits for instant dual communication. This beltpack is the perfect choice for live concerts and show professionals, delivering up to 4-times more power to the headphones than conventional beltpacks. The DC2's headphone volume and side tone adjustments are also easily accessed while in use. It also incorporates a combined microphone on/call button that allows simultaneous call signal operation and microphone use.
Click on the photo for a closer look.
To see a rear panel view, click here.
To see a bottom view, click here.
To view or print a copy of the data sheet for this item, click here.

 SADC2   $219.95














CHS1 Single Muff Headset Model CHS1

Granite Sound's single muff headset has been specially designed to combine the maximum in comfort, safety, durablility and reliability. Care has been taken in the acoustic and electrical isolation between microphone and headphone to reduce crosstalk to a minimum and is fully adjustable to afford a comfortable fit for the user. The practically indestructable microphone is mounted on a movable arm to the left of the headset and has been designed for optimum rejection of unwanted sound. The flexible 1.5 meter cable is virtually unbreakable due to the steel reinforcement braiding underneath the PVC coat. Fitted with a standard 4-pin female XLR connector for universal compatibility.
Click on the photo for a closer look.

SACHS1   $119.95













CHS2 Dual Muff Headset Model CHS2

Granite Sound's dual muff headset has been specially designed to combine the maximum in comfort, safety, durablility and reliability. Care has been taken in the acoustic and electrical isolation between microphone and headphone to reduce crosstalk to a minimum and is fully adjustable to afford a comfortable fit for the user. The practically indestructable microphone is mounted on a movable arm to the left of the headset and has been designed for optimum rejection of unwanted sound. The flexible 1.5 meter cable is virtually unbreakable due to the steel reinforcement braiding underneath the PVC coat. Fitted with a standard 4-pin female XLR connector for universal compatibility.
Click on the photo for a closer look.

SACHS2   $134.95













XLR CAble 25' XLR Extension Cable

Basic extension cable for connecting belt packs to a base station. Can be connected together to extend the length. Black with Neutrik gold plated connectors.
Click on the photo for a closer look.

 CA035   $13.95